Would it be possible for you (anyone) to make a tutorial / video on how to configure CEPH dedicated network?
Scenario: I have VMs installed on CEPH storage for HA. At the moment I am using the same network card for Proxmox host and VMs. I would like to instal a 2.5Gb or 10Bg or 100GBit network card and use it primarily for CEPH replication/storage....
Thanks
@slimtom welcome to the forums! Are you wanting to know how to reconfigure your Ceph network if I am following to use a different, diedicated network to segregate this traffic from general VM/management traffic?
@brandon-lee yes. My four servers have a built in 1gb Lan that suffice for VM traffic. But for Proxmox/CEPH I bought 10Gb cards and a switch..
I think this would be probable scenario for many of us..
I've followed your very useful tutorial on how to setup Proxmo cluster with CEPH:
Proxmox 8 Cluster with Ceph Storage configuration (youtube.com)
..and this could be a fantastic follow up on that.
For instance:
When setup a proxmox host/s with one network card, this card shares VM traffic and CEPH traffic. If the host has two or more (add-in) network cards, it would be useful to use one for VM traffic, other for CEPH traffic etc.
How to set this up?
@slimtom definitely sounds like a good topic or walkthrough video. I may brainstorm on this and see how I could approach that one. Thank you for the suggestion!
...especially because I haven't found it elsewhere...
@slimtom Just checking back in as I am getting the forums going back again. I am curious on how your Ceph configuration has came along?