Networking

Keep from switching IPs back and forth

If you are a system administrator or someone who spends time configuring routers or other network devices, you may have the need to place your laptop or workstation on the same network as the network device you are configuring.  Most devices, including home routers and other network equipment come preconfigured with a default IP address.  This is usually in an autoprivate IP address range of 192.168.X.X.  Many times it is cumbersome to have to keep switching your IP addresses to match your router or other network device you are connecting to and be on the IP address range of the real LAN network you are connected to.

There is an easy way to keep from having to keep switching your IP address back and forth from your LAN address to the configuration address to “talk” to the new network device with its default IP.  Oftentimes we forget about the functionality builtin to Windows that allows the assigning of more than one IP address.

If you take a look at your network properties, you will see that you have the ability to add more than one IP address as well as subnet mask in the advanced properties of your network connection.

How to do it

Get to the network connection properties which can easily be done by typing ncpa.cpl at a run or search menu.  Click Properties

switchip01

For this to work, you must have a static IP address set and not be getting an IP address from DHCP.  Set your first static IP address and then select Advanced.

switchip02
switchip03


Next, we need to hit theĀ Add… button in the advanced TCP/IP Settings box which will allow us to specify additional IP addresses.

Now, we will simply add the IP address and subnet mask of the additional address space we are needing to work with (our router we are configuring).

switchip04

Now as you can see below, we have both IP addresses we need to work with appended to the network connection.  Also, we are not limited to (2) connections.  You can add any number of other IPs that you need to or often connect to.

switchip05

This provides an easy way to keep from having to switch your network connection properties back and forth causing loss of connectivity on one or the other.  The only downside to this workaround or method of doing things is that you have to have a manually assigned (static) ip address instead of DHCP.  This may not be possible in some network settings as you may not be allowed to set a static IP address.  However, if it is possible, then this provides a great way to work on multiple subnets and not have to swap IP addresses back and forth between configurations.

Subscribe to VirtualizationHowto via Email šŸ””

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Brandon Lee

Brandon Lee is the Senior Writer, Engineer and owner at Virtualizationhowto.com and has over two decades of experience in Information Technology. Having worked for numerous Fortune 500 companies as well as in various industries, Brandon has extensive experience in various IT segments and is a strong advocate for open source technologies. Brandon holds many industry certifications, loves the outdoors and spending time with family.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.